Customs duty on Flat-rolled iron/steel, width >=600mm, <0 5 m thickness, clad, plated or coated w in Nepal

Flat-rolled iron/steel, width >=600mm, <0 5 m thickness, clad, plated or coated w is classified under HS code 7210.12.00 (chapter 72, Iron and steel). It attracts 5% customs duty (general), plus 13% VAT on the CIF value and duty.

5%General duty
5%India & SAARC (SAFTA)
13%VAT
kgCustoms unit
Before you ship: goods under heading 7210 may need approval from the Nepal Bureau of Standards and Metrology (NBSM). See the import rule and its source

Landed cost — worked example

For a shipment with a CIF value of Rs 100,000 (cost + insurance + freight to the Nepal border), the customs duty and VAT work out as:

General rate (5%)Landed cost Rs 118,650
Goods (CIF value)Customs dutyVAT 13%
OriginCustoms dutyDuty amountVAT (13%)Landed cost
General (any origin)5%Rs 5,000Rs 13,650Rs 118,650

Excise duty, the road-development fee and other charges apply to specific goods (vehicles, alcohol, tobacco, petroleum…) and are not in the figure above. Open the full calculator →

Same family, compared by duty: heading 7210

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. 11 lines. The code follows from what the goods are, so read the description before the rate.

Each step is a duty rate in this family. Tap a step to see only its lines.

HS codeWhat the goods must beGeneralSAFTA
7210.11.00Of a thickness of 0.5 mm or morePlated or coated with tin5%18.65% total5%18.65% total
7210.12.00Your lineOf a thickness of less than 0.5 mmPlated or coated with tin5%18.65% total5%18.65% total
7210.20.00Plated or coated with lead, including terne-plate30%46.9% total30%46.9% total
7210.30.00Electrolytically plated or coated with zinc30%46.9% total30%46.9% total
7210.41.00CorrugatedOtherwise plated or coated with zinc30%30%
7210.49.00Other (none of the above)Otherwise plated or coated with zinc30%46.9% total30%46.9% total
7210.50.00Plated or coated with chromium oxides or with chromium and chromium oxides30%46.9% total30%46.9% total
7210.61.00Plated or coated with aluminium - zinc alloysPlated or coated with aluminium30%46.9% total30%46.9% total
7210.69.00Other (none of the above)Plated or coated with aluminium30%46.9% total30%46.9% total
7210.70.00Painted, varnished or coated with plastics30%46.9% total30%46.9% total
7210.90.00Other (none of the above)30%46.9% total30%46.9% total

The chip is customs duty. “Total” under it is everything charged at the border (customs duty, excise, VAT and other fees) as a share of CIF value, for goods from other countries and from India. Your line already has the lowest general duty in its family. Declaring a lower-duty line that does not match the goods leads to reclassification, the duty difference and a fine. When unsure, ask the Department of Customs for an advance ruling.

Nepal’s imports of Flat-rolled iron/steel, width >=600mm, <0 5 m thickness, clad, plated or coated w

Nepal imported about Rs 5.45 Arab of Flat-rolled iron/steel, width >=600mm, <0 5 m thickness, clad, plated or coated w in FY 2082/83, mainly from India, China, Malaysia.

Rs 150Average declared value per kg
Rs 5.93Collected at customs per kg (4% of value)
3.63 crore kgImported in FY 2082/83

Import value divided by quantity, FY 2082/83, Department of Customs. It averages every grade, brand and origin under this line, so use it to sense-check a quote, not as a price list.

Source countryImport value (FY 2082/83)
IndiaRs 4.64 Arab
ChinaRs 80.16 Crore
MalaysiaRs 70.8 Lakh
All countriesRs 5.45 Arab

Related products

Ferrous products obtained by direct reduction of iron ore, in lumps, pellets or siHS 7203.10.00 · 5% dutyFlat/hot-rolled iron/steel, in coils, width >=600mm, not pickled,<3mm thicknessHS 7208.39.00 · 5% dutySemi-finished products of iron or non-alloy steel, <025% carbon, nesHS 7207.19.00 · 5% dutyBar & rods, hot-rolled circular cross-section measuring <=8mm in diameterHS 7213.91.10 · 5% dutyNon-alloy pig iron containing, =<05% phos p orus, in pigs, blocks or other primerHS 7201.10.00 · 5% dutyFlat/hot-rolled iron/steel, not in coils, width >=600mm, > 10mm thicknessHS 7208.51.00 · 5% dutyFlat-rolled products of stainless steel, > 600mm wide, nesHS 7219.90.00 · 5% dutyFerro-silico-manganeseHS 7202.30.00 · 5% duty
Full landed-cost calculatorOpen 7210.12.00 in the tariffChapter 72